Chengdu Intercooling and Cryogenic ThermoTST TS series ultra-high speed high and low temperature airflow impactor, with mobile and portable design, provides clean and dry cold and hot cycle impinging airflow ThermoTST TS series heat flow meter provides fast and accurate temperature measurement. It is suitable for simulating various temperature measurement and adjustment applications. It is widely used in online high and low temperature cycle test of integrated circuit IC cards, electronic chips, flash memory, optical fiber transceivers or electronic circuits, thermal test cycle, high and low temperature impact test Thermal shock, product characteristic analysis, etc

ThermoTST TS series heat flow meters use innovative temperature testing solutions to facilitate you to directly test optical components, PCB circuit boards, IC chips, device modules, etc. in the laboratory and on the working platform.

ThermoTST TS series high and low temperature tester features:

Single stage chiller design, no need for liquid nitrogen or carbon dioxide cooling

Rapid warming or cooling changes per second

Temperature control accuracy and resolution ± 0.1 ℃

Temperature accuracy ± 1.0 ℃

The equipment can provide extremely high temperature+225 ℃; Very low temperature - 90 ℃

Remote communication supports RS-232 and LAN; Optional: GPIB

The control panel is operated by high-definition touch screen

Special design to prevent moisture condensation on the DUT

2 detection modes Air mode and DUT mode

Compared with the traditional high and low temperature test chamber, the main advantages of Chengdu intercooling low-temperature ThermoTST TS series heat flow meter are as follows:

1. The temperature change rate is faster, and the temperature can be quickly increased/decreased

2. Temperature control accuracy: ± 1 ℃;

3. Real time monitoring of the real temperature of the components to be measured, and the temperature of the impact airflow can be adjusted at any time

4. For a single IC (module) among many components on PCB, high and low temperature impact can be carried out independently without affecting other peripheral components

5. Conduct temperature cycling/impact on the IC on the load board of the tester platform; Traditional high and low temperature boxes cannot be used for such tests.

6. Provide accurate and fast ambient temperature for the whole integrated circuit board.

One、ThermoTST TS-300 series heat flow meter: small desktop model, suitable for temperature testing of traditional semiconductor and small assembly devices in laboratory or industrial production environment.

Two、ThermoTST TS-700 series heat flow meter: This series can quickly and accurately control your components and modules to reach the required temperature. The extreme temperature control function is - 90 ° C to+225 ° C, which can not only improve the productivity by accelerating the time to reach the set temperature, but also enable high power components and high heat capacity devices to meet the test conditions of the Chinese Military Standard (GJB), American Standard (MIL-STD) and JEDEC Association standards, Meet the continuous test for 24 hours and 7 days. The powerful and flexible TS-700 series high and low temperature heat flow meter can be used either for direct testing alone or for external chambers and hoods.

Experts in the field of thermal engineering and test system development of Chengdu intercooling and low temperature for more than 12 years. ThermoTST TS series heat flow meter is widely used in the chip industry as an excellent high-speed heat test equipment by providing a precise temperature test environment.